To Next PageTo Next Page
Need help?Do you have a question about the Dyna-Glo WK95C8 and is the answer not in the manual?
General| Model | WK95C8 |
|---|---|
| Type | Kerosene Convection Heater |
| Heating Area | 1, 000 sq. ft. |
| Fuel Tank Capacity | 1.9 gallons |
| Safety Features | Tip-over switch |
Critical safety warnings regarding fuel, operation, and fire hazards.
Guidelines for proper ventilation to prevent indoor air pollution.
Warnings about touching hot surfaces and operating without guards.
Instructions for removing all packaging materials from the heater.
Steps for assembling the heater, including guards and top plate.
Details on using 1-K kerosene, avoiding contamination, and safe storage.
Step-by-step guide for safely fueling the heater outdoors using a siphon pump.
Importance of soaking the wick before first ignition to prevent air pockets.
Instructions for operating the automatic ignition system with batteries.
Procedure for lighting the heater using a match if the automatic system fails.
Troubleshooting steps for ignition system failures, checking batteries and igniter.
How to test the igniter plug's position and function.
Guide to adjusting the wick for optimal flame height and combustion.
Indicators that signal the need for wick maintenance or dry burning.
Detailed steps for performing a dry burn to clean the wick and remove carbon.
Instructions for removing tar deposits from the wick guide.
Symptoms indicating the wick needs replacement and part number.
Tools required and step-by-step instructions for replacing the wick.
Step-by-step guide to safely turn off and confirm the heater is extinguished.
Warnings about cooling time before reigniting and wick maintenance.
Explanation of the automatic safety shut-off mechanism and its function.
Importance of checking the safety shut-off device regularly and after wick replacement.
Detailed instructions for preparing the heater for long-term storage to ensure efficiency.
Common causes and corrective actions for ignition failure.
Solutions for issues like high flame, drafts, or carbon buildup.
Troubleshooting for inconsistent flame behavior, often related to fuel or wick.
Reasons for excessive wick consumption and corrective fuel choices.
Diagnosing and fixing issues with the wick adjuster knob movement.
Steps to take when the wick fails to lift, often involving safety mechanisms.
Emergency procedure for fire situations, emphasizing calling fire department.
A detailed list of heater parts with corresponding numbers and part numbers.
An illustrated diagram showing the assembly of all heater components.
Key specifications including model, heat output, capacity, and dimensions.
Duties of the owner, including proper operation and maintenance.
Exclusions from warranty coverage, such as improper fuel or lack of maintenance.
Procedures for submitting warranty claims and contacting customer service.
Instructions for registering the product warranty online or by mail.
