To Next Page
J
Jamie WebsterJul 28, 2025
What to do if Dyna-Glo Electric Heater is not heating?
- LLuis PhillipsJul 28, 2025
If your Dyna-Glo Electric Heater isn't heating, it could be due to several reasons. First, the overheat protection might have activated. Inspect the heater to ensure that the air inlets and outlets are not blocked, as this can cause overheating. Switch off the circuit breaker for 30 minutes to allow the unit to cool down, then turn the power back on. Another possibility is that the breaker has tripped; if so, reset the breaker at the fuse panel and restart the heater. Finally, the room temperature might have reached the set thermostat temperature. In this case, adjust the temperature setting to ensure it is higher than the current room temperature.
General
