EasyManua.ls Logo

Dyna-Glo RMC-KFA45DGP-01 - User Manual

Dyna-Glo RMC-KFA45DGP-01
76 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CONSUMER : Retain this manual for future reference.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 877-447-4768 8:30 a.m. - 4:30 pm CST, Monday - Friday.
or email us at customerservice@ghpgroupinc.com
INDOOR/OUTDOOR PRODUCTS
KEROSENE PORTABLE
FORCED AIR HEATERS
“USER’S MANUAL AND
OPERATING INSTRUCTIONS”
Before the first use of this heater, please read this USER’S MANUAL very
carefully. This USER’S MANUAL has been designed to instruct you as to
the proper manner in which to assemble, maintain, store, and most
importantly, how to operate the heater in a safe and efficient manner.
Please keep this manual for future reference.
COMPLIES WITH UL733 AND
ANSI A10.10-1990
CAN/CSA/B140.0-03 AND CSA
B140.8-1967
MODEL : RMC-KFA45DGP-01, RMC-KFA75TDGP-01
RMC-KFA125TDGP-01, RMC-KFA210TDGP-02
Pro

Table of Contents

Questions and Answers

  • C
    Christopher ClarkAug 9, 2025
    Why does my Dyna-Glo RMC-KFA45DGP-01 ignite then shut off with error code E1?
    • T
      Timothy WaltersAug 9, 2025
      If your Dyna-Glo Heater ignites but shuts off shortly after, and the indicator lamp flickers displaying 'E1', several issues could be the cause. It might be due to incorrect pump pressure, or blockages in the air output, air intake, or lint filter. A dirty fuel filter or nozzle could also be responsible. Other potential causes include a dirty photocell lens, improper installation of the photocell assembly, a faulty electrical connection between the photocell and the main PCB assembly, or a defective photocell.
  • E
    Emily MooreAug 26, 2025
    How to fix a Dyna-Glo RMC-KFA45DGP-01 Heater when the fan won't turn on?
    • M
      Matthew QuinnAug 26, 2025
      If the fan on your Dyna-Glo Heater isn't working when plugged in and switched on, it might be because the thermostat setting is too low. Try turning the thermostat control knob to a higher setting. Another possibility is a bad electrical connection between the motor and the MAIN PCB assembly; in that case you should check the electrical connections.

Summary

3. UNPACKING AND ASSEMBLY

1. Assembling Handle & Cord Wrap

Instructions for attaching the handle and cord wrap.

1. Assembling BTU Control Valve

Instructions for installing the BTU control valve.

2. Assembling Handle & Wheel and Cord Wrap

Instructions for assembling the handle, wheels, and cord wrap.

3. Assembling Louver

Instructions for fitting the louver to the heater.

4. KEROSENE (1-K)

6. FUELING YOUR HEATER

7. OPERATION

A. VENTILATION

B. OPERATION

Provides a detailed guide for starting and operating the heater.

9. MAINTENANCE

E. NOZZLE

F. SPARK PLUG

G. PHOTOCELL

H. FUEL FILTER

I. PUMP PRESSURE ADJUSTMENT

10. REPLACING FUSE

11. TROUBLE SHOOTING GUIDE

12. WIRING DIAGRAM

A. WIRING DIAGRAM (RMC-KFA45 DGP-01 Model)

B. WIRING DIAGRAM (RMC-KFA75;125 TDGP-01 Models)

C. WIRING DIAGRAM (RMC-KFA210 TDGP-02 Model)

14. EXPLODED PARTS DRAWING (RMC-KFA45 DGP-01;75;125 TDGP-01 Models Only)

14. EXPLODED PARTS DRAWING (RMC-KFA 210 TDGP-02 Model Only)

15. PARTS LIST (RMC-KFA45 DPG-01;75;125 TDGP-01 Models Only)

15. PARTS LIST (RMC-KFA210 TDGP-02 Model Only)

Dyna-Glo RMC-KFA45DGP-01 Specifications

General IconGeneral
BrandDyna-Glo
ModelRMC-KFA45DGP-01
CategoryHeater
LanguageEnglish

Related product manuals