CAUTION: "RISK OF BURNS"
DO NOT OPERATE HEATER WITHOUT THE PROTECTIVE
GUARD OR GRILLE.
1. REMOVE THE HEATER AND ALL PACKING MATERIALS
FROM THE BOX. (Fig.2)
NOTE : Save the shipping carton and packing materials for
future storage.
•Heater
•2 “C” cell batteries
•Siphon pump
•2 Screws
2. ASSEMBLING PROCEDURE OF HEATER.
A) REMOVE THE TOP GRILL FROM HEATER AND
UPPER PAD.
Remove the PAD from the heater as described in Fig 3.
Lift up Glass from Middle plate and remove Lower pad on
Middle plate. (Fig 3)
FIG 4 related.
Place the Glass on the Middle plate.
Place Top plate on the Glass.
Assemble Grill Glass fix on the Middle plate.
Align and insert 4 bended rods to Clipped Guides on
Middle plate. (Fig 4)
Align the 2holes on Top Grill with the 2 mounting holes on
the Guard Grill as shown in Fg 5.
Secure each holes with a screw.
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
3
UNPACKING AND ASSEMBLY
To Next Page
Loading...
