dynabook TECRA A40-J - Page 26

1
CN3270
CN3240
1
2
2
Keyboard Backlight Harness
Keyboard FPC
2
1
CN5390
CN8001
1
2
Figure 4-31 Removing the system board (1)
2. Disconnect the LCD/Webcam harness from the connector CN5390 and
DC IN harness from the connector CN8001 on the System Board
(FMERSY*).
Figure 4-32 Removing the system board (2)
3. Remove the following the screws. Carefully lift up the system board.