dynabook TECRA A40-J - Removing the Display Hinges

1
3
2
1
3
Figure 4-43 Installing the LCD unit (3)
8. Set the LCD mask on the LCD cover while engaging all the latches.
Figure 4-44 Installing the LCD unit (4)
4.28 Display hinges
4.28.1 Removing the display hinges
To remove the display hinges, follow the steps below and refer to Figure 4- 45.
1. Release the following screws and remove the left & right hinges.
■
S2x2.5BT
x2
(Described as “1” in the figure)
■ SH2.5x2.5BT
x6
(Described as “2” in the figure)