dynabook TECRA A40-J - Installing the Display Hinges

1
display hinge
2
2
2
1
2
2
2
display hinge
Do not reuse the removed wireless antennas. Be sure to use new wireless
antenna.
Figure 4-45 Removing the display hinges
4.28.2 Installing the display hinges
To install the display hinges, follow the steps below and refer to Figure 4- 45.
1. Set the left & right hinges and secure them with the screws.
4.29 Wireless LAN antennas
4.29.1 Removing the Wireless LAN antennas
To remove the Wireless LAN antennas, follow the steps below.
1. Release the Wireless LAN antenna cables from the guides on the LCD
cover.
2. Peel off the Wireless LAN antennas from the LCD cover.