8. Set the LCD mask on the LCD cover while engaging all the latches.
Figure 4-43 Installing the LCD unit (4)
4.28
Display
hinges
4.28.1
Removing the display hinges
To remove the display hinges, follow the steps below and refer to Figure 4- 44.
1. Release the following screws and remove the left & right hinges.
■
S2x2.5BT x2 (Described as “1” in the figure)
■
SH2.5x2.5BT x4 (Described as “2” in the figure)
■
F2.5x5BT x4 (Described as “3” in the figure)
To Next Page
Loading...
