dynabook TECRA A50-J - Cover Assembly and Base Assembly

3
7
9
6
4
1
5
8
2
4.11 Cover Assembly and Base Assembly
4.11.2 Removing the Cover Assembly and Base Assembly
To remove the Base Assembly, follow the steps below and refer to Figure 4- 4 to
Figure 4-5.
1. Close the display panel and turn the computer face down.
2. Remove the following screws securing the Cover Assembly and
the Base Assembly.
Figure 4-4 Removing the Base Assembly (1)
3. Separate the Base Assembly and Cover Assembly while
releasing the latches using a plectrum.