dynabook TECRA A50-J - Page 42

Do not reuse the removed wireless antennas. Be sure to use new wireless antenna.
Wireless LAN
antenna (AUX)
Wireless LAN
antenna (Main)
4.28.2 Installing the display hinges
To install the display hinges, follow the steps below and refer to Figure 4- 44.
1. Set the left & right hinges and secure them with the screws.
4.29 Wireless LAN antennas
4.29.1 Removing the Wireless LAN antennas
To remove the Wireless LAN antennas, follow the steps below.
1. Release the Wireless LAN antenna cables from the guides on the
LCD cover.
2. Peel off the Wireless LAN antennas from the LCD cover.
4.29.2 Installing the Wireless LAN antennas
To install the Wireless LAN antennas, follow the steps below.
1. Stick new Wireless LAN antennas (AUX/Main) in place.
Figure 4-45 Sticking the Wireless LAN antennas
2. Arrange the Wireless LAN antenna cables in place as shown in
below figure.