Dynacord DDL 204 - Operation

5. OPERATION
The DDL 204 is operated by a rotary encoder with push
function (ENTER) and 6 function keys.
The DDL 204 contains 4 different modes which can be
selected by the corresponding mode key directly from
any state.
1. PLAY MODE
Mode after switching on
Program selection mode
2. E DIT MODE
Alteration of configurations and parameters
Indication via EDIT LED
Activation via EDIT key
Return to PLAY mode via EDIT key
3. S TORE MODE:
Storing and copying programs
Activation via STORE key
Exit via STORE key
4. O PTION MODE:
Editing functions pertaining to equipment
Switching the edit protection on and off
Activation via OPTION key
Return to PLAY mode via OPTION key
5.1 PROGRAM SELECTION
Programs can only be called up when the DDL 204 is in
Play mode. This is the case after switching on, for
example.
The DDL 204 contains 30 program memory places. Each
program can be edited freely and can be saved to any
user memory place.
1 To call up a memory place you search for the pro¬
gram you want with the rotary encoder (11) or with
the two SELECT keys (6) and (7).
EDIT •« SELECT »• PUSH ’ ENTER
•« PARAMETER ►
I lHHWlMMl
STORE
OPTION
BYPASS
□
2 The new delay setting appears on the display and
the program number on the right in the top line blinks.
The new delay configuration can be seen on the
status LED's MONO 1-IN-4 or STEREO 1-IN-2.
ffl 350 2] 700
LH
H3 350
[4] 700 ms
3 Activate the program by pressing the rotary encoder
(11) (ENTER). The program number stops blinking.
5-1