EasyManuals Logo

Dynacord DPA 4245 User Manual

Dynacord DPA 4245
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER‘S MANUAL
Features
2 x 450 watts output power capacity DPA 4245
2 x 600 watts output power capacity DPA 4260
oating 100 V / 70 V / 25 V power outputs (isolated outputs)
low impedance outputs (direct outputs)
bridged mode operation, switchable
all outputs are protected against idling and short-circuit
mains supply 230 V AC 50/60 Hz
POWER REMOTE function
service mains switch
active ventilation via 2 temperature-controlled DC-fans
electronically balanced inputs
routing switch for parallel linked operation
input gain controls
integrated audio limiters
power-on switching noise suppression
protection circuitry: DC/HF, Back-EMF, output voltage overload limiters, initial inrush current limiter,
output peak current limiter
18 dB/oct. LO-cut lter at 45 Hz
SIGNAL and LIMIT indication for optical monitoring
thermal overload protection for the heat sink and the internal power supply, with PROTECT-function
inputs transformers for balanced, oating operation are optionally available
XLR-type and binding post clamping input connectors
19“ frame size, 3 HU
2 x 450 WATTS POWER AMPLIFIER
DPA 4245
SIGNAL
LIMIT
POWER
PROTECT
CH A
CH B
DPA 4245 / DPA 4260 POWER AMPLIFIER

Other manuals for Dynacord DPA 4245

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynacord DPA 4245 and is the answer not in the manual?

Dynacord DPA 4245 Specifications

General IconGeneral
BrandDynacord
ModelDPA 4245
CategoryAmplifier
LanguageEnglish

Related product manuals