Need help?Do you have a question about the Dynacord Xa 4000 and is the answer not in the manual?
General| Output Power (4 Ohms) | 2 x 1000 W |
|---|---|
| Output Power (8 Ohms) | 2 x 600 W |
| Channels | 2 |
| Protection | DC |
| Connectors (Inputs) | XLR |
| Connectors (Outputs) | Speakon |
Comprehensive safety guidelines for operating the power amplifier, covering electrical hazards, environmental conditions, and proper use.
Specific instructions for qualified service technicians, focusing on safety regulations, component replacement, and internal maintenance procedures.
Details on Class H technology, switching power supply, integrated crossover, LPN filters, and protection circuitry.
Instructions for proper installation, ventilation, temperature management, rack mounting, and protection against environmental factors.
Explanation of the front panel power switch, soft-start function, and the POWER LED indicator.
Detailed description of the PROTECT, SIGNAL, and LIMIT LEDs, indicating amplifier status and potential issues.
Information on SPEAKON connectors for SYSTEM, SUB, and TOP channels, including pin assignments and safety warnings.
Comprehensive list of technical data including load impedance, output power, frequency response, input sensitivity, and signal-to-noise ratio.
A detailed block diagram illustrating the signal path, power supply, crossover, protection mechanisms, and control systems within the amplifier.
Technical drawings showing the front, side, and top views of the Xa 4000 amplifier with precise physical dimensions indicated.
To Next Page
