Need help?Do you have a question about the Dynacord S 900 and is the answer not in the manual?
General| Type | Stereo Power Amplifier |
|---|---|
| THD | < 0.05% |
| Signal-to-Noise Ratio | > 100 dB |
| Damping Factor | > 200 |
| Weight | 13.5 kg |
| Power Output (4 Ohms) | 2 x 450 W |
| Power Output (8 Ohms) | 2 x 300 W |
| Input Sensitivity | 1.4V |
| Input Impedance | 20 kOhms (balanced) |
| Dimensions (W x H x D) | 483 mm x 88 mm x 347 mm |
| Power Supply | 230 V AC, 50 Hz |
Read and follow all safety instructions and warnings provided with the appliance to prevent fire or electric shock.
Details essential safety precautions and procedures for qualified service personnel only for maintenance.
dB-scaled rotary potentiometers for adjusting overall gain, typically set between 0dB and -6dB for optimal performance.
Explanation of LED indicators for limit status, signal presence, protection activation, and power on status.
Main power switch for unit activation, featuring delayed speaker connection and inrush current limiting.
Description of SPEAKON output connectors for channels A, B, and the Bridged-out feature.
Explanation of input routing selection for stereo, parallel mono, and bridged mono operation.
Ground lift switch to prevent hum loops by isolating chassis from signal ground.
Detailed output power specifications for S900 and S1200 models at various impedances.
Key performance metrics including frequency response, slew rate, THD, IMD, and signal-to-noise ratio.
Specifications for input impedance, sensitivity, damping factor, and mains voltage.
Visual representation of the internal signal paths, power supply, protection circuits, and control systems.
Detailed drawings and measurements (in mm) for rack mounting and overall physical size.
Details on the warranty period, conditions for claims, and exclusions for material and workmanship defects.
To Next Page
