H2. Press the button twice to adjust the roller pressure to the maximum.
The above give you different applications of the massage chair controller. With the controller,
you can make many adjustments with regards to the range, width, and speed. In addition, you
can combine and adjust massage programs to customize and utilize different massages
according to your own preference.
The front kneading, shiatsu, and tapping can be selected concurrently. The shiatsu selection
can only be selected individually and cannot work in tandem with the front CCW kneading, CW
kneading, or the tapping.
You should turn OFF the roller pressure button so that all of the roller massage functions will
stop all at the same time.
The massage range refers to the distance between the upper part to the lower end of the
massage chair. The complete approximate range is 22 inches.
The massage width range refers to the distance between the two rows of massage which are
divided into 3 levels. The approximate measurements are wide = 7 inches, medium = 5 inches,
and narrow = 3 inches.
The roller pressure is divided into 5 levels which adjust the transmission of the tapping and
kneading functions:
Strength 1 2 3 4 5
Tapping (times/minute) 299 350 401 466 515
Kneading (times/minute) 12 16 21 26 32
-28-
To Next Page
Loading...
General