Need help?Do you have a question about the Dynapac CA 250 and is the answer not in the manual?
General| Brand | Dynapac |
|---|---|
| Model | CA 250 |
| Category | Construction Equipment |
| Language | English |
Ensure two-thirds drum width is on solid ground when near an edge.
Avoid driving across slopes; drive up/down. ROPS is recommended.
Details the machine type plate showing manufacturer, type, and PIN.
Explains the location of the machine's Product Identification Number (PIN).
Instructions for switching the battery disconnecter to the ON position to power the roller.
Guide to adjusting the operator's seat for comfortable posture and control reach.
Instructions for adjusting the operator's seat in a cab with ROPS, including seat belt use.
Procedure for starting the engine, including preheating, lever neutral, and idling.
Guidance on operating the forward/reverse lever, speed selectors, and testing brakes.
Instructions for setting drum and rear axle drive speeds when the machine is bogged down.
Procedure to lock the articulation before lifting the roller using lifting points.
Information on lifting the roller, referring to lifting plate and gear requirements.
Steps to restore articulation to open mode after lifting.
Procedure for towing the roller a short distance with the engine running.
Procedure for towing the roller a short distance with the engine not working.
Instructions for adjusting the rear axle brake, including screw adjustment.
Procedure to disengage the drum brake for towing by unscrewing socket screws.
Guidelines for safe towing of the roller, including speed limits and towbar use.
Instructions for securing the roller for transport, including chocks and lashing.
To Next Page
