Need help?Do you have a question about the Dynapac CA 362 Series and is the answer not in the manual?
General| Brand | Dynapac |
|---|---|
| Model | CA 362 Series |
| Category | Construction Equipment |
| Language | English |
Explains warning symbols and cautions for safe operation and environmental protection.
Provides essential warnings for operating the machine safely, including ventilation and hood safety.
Provides detailed weight and dimension data for different models of the roller.
Illustrates and lists all service and maintenance points on the machine for easy reference.
Outlines essential checks to be performed every 10 hours of operation for daily maintenance.
Details the maintenance tasks required every 50 hours of operation for weekly servicing.
Lists maintenance procedures to be carried out every 250 hours of operation (monthly).
Provides step-by-step instructions for adjusting scrapers on CA 262, CA 362/512, and PD models.
Procedure to verify the correct functioning of the roller's brakes before operation.
Steps for checking and cleaning the air cleaner's main and backup filters.
Detailed instructions for lubricating the steering joint and cylinder nipples with grease.
Procedure for checking the oil level in the rear axle differential housing.
Steps to check the oil level in the rear axle planetary gears for different models.
Instructions for checking oil levels in the drum gearbox and drum cartridge.
Procedures for lubricating engine hood hinges and changing engine oil and filter.
Instructions for lubricating the steering chain and the operator's seat bearing.
Steps for preparing the diesel engine and battery for long-term storage.
Identifies fuse boxes and relays located on the instrument panel.
To Next Page
