Dynapac CA 362 Series User Manual

10 CA 262/362/512 M262EN2
Item. in Measure See page Comments
fig. 1
3 Replace fuel filter See engine manual
5 Lubricate controls and joints 24
3 Clean the pre-filter 24
25 Change engine oil and oil filter 24 See engine manual
36 Lubricate the steering chain 25 Optional
35 Lubricate the seat bearing 25 Optional
MAINTENANCE MEASURES
Item. in Measure See page Comments
fig. 1
23 Check oil level in rear axle/planetary gearing 19
13 Check oil level in drum gearbox 20
15 Check oil level in the drum cartridge 21
32 Clean the radiators 21
20, 24 Re-tighten bolted joints 22 Applies only to new or
reconditioned component
16 Check rubber elements and screw fasteners 22
30 Check battery 23
Inspect the air conditioning 23 Optional
Every 250 hours of operation (Monthly)
Item. in Measure See page Comments
fig. 1
7 Check bleeder filter on hydraulic reservoir 26
8 Change hydraulic fluid filter 26
9 Drain condensate from hydraulic reservoir 26
26 Drain condensate from fuel tank 27
4 Replace air cleaner main filter 27
22 Change oil in rear axle differential 27
23 Change oil in the rear axle planetary gearing 28
39 Replace the fresh air filter in the cab 29 Optional
Check diesel engine valve clearance See engine manual
33 Check belt tension for drive belt system See engine manual
Every 1000 hours of operation (Every six months)
Item. in Measure See page Comments
fig. 1
9, 10 Change fluid in hydraulic reservoir 30
12, 15 Change oil in the drum cartridge 30
13 Change oil in drum gearbox 31
37 Lubricate Forward/Reverse control 31
17 Inspecting the steering joint 31
38 Overhaul air conditioning 32 Optional
Every 2000 hours of operation (Yearly)
Every 500 hours of operation (Every three months)

Dynapac CA 362 Series Specifications

General

Brand	Dynapac
Model	CA 362 Series
Category	Construction Equipment
Language	English