Need help?Do you have a question about the Dynapac CA 262 Series and is the answer not in the manual?
General| Brand | Dynapac |
|---|---|
| Model | CA 262 Series |
| Category | Construction Equipment |
| Language | English |
Perform daily checks on scrapers, cooling air, coolant, engine oil, fuel, and brakes for operational readiness.
Conduct weekly maintenance including air cleaner, steering lubrication, wheel nuts, tire pressure, and optional AC checks.
Carry out monthly checks on rear axle, drum gearbox, drum cartridge oil levels, radiators, bolted joints, battery, and AC.
Perform three-monthly maintenance including lubrication of steering chain/seat bearing, and engine oil/filter change.
Execute six-monthly tasks like changing hydraulic fluid filters, draining fuel tank, replacing air filter, and changing axle oil.
Conduct annual maintenance including hydraulic fluid and drum cartridge oil changes, gearbox oil change, and AC overhaul.
Explains the electrical system, fuses, and relays, and their locations on the instrument panel.
Details the rating and function of various fuses located on the machine's fuse boxes.
Lists the ampere rating and function of fuses located in the cab's overhead fuse box.
Describes the main fuses and relays for the starter, preheater, and general supply systems.
Lists the functions of various relays such as VBS, horn, hourmeter, fuel level, and brake relays.
Explains the control box for engine preheating and relays for AC and condenser fans in the cab.
To Next Page
