Name: Dynapac CA25
Brand: Dynapac
Rating: 4 (1 reviews)

To Next Page

Instructions Manual

4812331840EN-Rev 4

Operating & Maintenance

Vibratory Roller

CA25/30/35

Engine

Cummins QSF 3.8

Starting with series

10300181KLE000072-

Reservation for changes

Printed in India

Table of Contents3
Introduction4
- The Machine10
- Intended Use10
- Warning Symbol10
- Safety Information10
- General11
Safety - General Instructions12
Safety - During Operation14
- Operation Near Edges14
- Slope14
Special Instructions15
- Standard Lubricants and Other Recommended Oils and Fluids15
- Higher Ambient Temperatures, above +40°C15
- Lower Ambient Temperature - Risk of Freezing15
- Temperatures15
- High Pressure Cleaning16
- Fire Extinguisher16
- Roll over Protection Structure (ROPS), ROPS-Approved Cab16
- Welding16
- Battery Handling17
- Jump Starting17
Technical Specifications19
Noise/Vibrations19
- Vibrations - Operator Station19
- (Iso 2631)19
- Noise Level19
Technical Specifications - Dimensions20
- Dimensions - Side View20
- Dimensions - Top View21
Technical Specifications - Weights and Volumes22
Technical Specifications - Working Capacity22
Technical Specifications - General24
- Tire Water Blasting Procedure24
- Hydraulic System25
- ROPS Bolts25
- Torque26
Machine Description27
- Diesel Engine27
- Electrical System27
- Propulsion/Transmission System27
- Brake System27
- Secondary and Parking Brake27
- Steering System27
- Vibration System28
- Cab28
- Emergency Exit28
- FOPS and ROPS28
Machine Plate - Identification29
- Product Identification Number on Frame29
- Machine Type Plate29
- Explanation of Serial Number (17PIN)29
- Engine Identification Plate30
Machine Description - Decals31
- Location - Decals31
- Safety Decals33
- Information Decals34
Machine Description - Instruments/Controls35
- Locations - Instruments and Controls35
- Functional Description - Membrane Panel38
- Functional Description - Display40
A/C - System Operation53
- Introduction53
- Using the Cab Controls53
  - Defroster53
  - Heat53
- Electronic Control Unit54
- Main Fuses54
- Relays55
  - The Table below Shows Fuse Amperage and Function55
Operation - Start-Up56
- Before Starting56
- Master Switch - Activation56
- Before Starting57
- Operator Position57
- View58
- Interlock58
Operation - Start-Up58
- Start of Diesel Engine59
Operation - Driving60
Operation - Vibration61
- Vibration Switch61
- Vibration - Activation61
Operation - Stopping64
- Braking65
- Parking of the Machine66
  - Master Switch66
  - Chocking the Drums66
- Long-Term Parking67
Miscellaneous69
- Lifting69
- Towing70
Operating Instructions - Summary73
Preventive Maintenance74
- Acceptance and Delivery Inspection74
- Warranty74
Maintenance - Lubricants and Symbols75
- Maintenance Symbols76
Maintenance - Planned Maintenance77
- Service and Inspection Points77
Scheduled Maintenance and Lubrication78
Service and Maintenance Point79
- Every 10 Hours of Operation (Daily)79
- Every 50 Hours of Operation (Weekly)79
- After the First 50 Hours of Operation79
- Every 250/750/1250/1750 Hours of Operation (Monthly)80
- Every 500/1500 Hours of Operation (Every Three Months)80
- Every 1000 Hours of Operation (Every Six Months)81
- Every 2000 Hours of Operation (Weekly)81
- Every 10 Hours of Operation (Daily)83
Radiator - Check/Cleaning94
Bolted Joints - Checking Tightening95
Rubber Element and Fastening Screws95
Check Battery Cell95
Hydraulic Reservior-Bleeder Filter Check98
Diesel Engine - Oil and Filter Change98
Replacing the Main Air Filter99
Change the Hydraulic Fluid Filter99
Fuel Tank Drainage100
Diesel Engine - Oil and Filter Change102
Hydraulic Reservior - Fluid Change104
Drum - Oil Change104
Control - Lubrication105
Automatic Climate Control105
Change the Hydraulic Fluid Filter107
Drum Gearbox (D/PD) - Changing the Oil107

Brand	Dynapac
Model	CA25
Category	Construction Equipment
Language	English

Dynapac CA25 User Manual

Table of Contents

Questions and Answers:

Dynapac CA25 Specifications

Related product manuals