Dynapac CA25 - Lubricants, Symbols, and Maintenance Schedule

Maintenance – Lubricants and symbols
10-03-2022 4812331840EN 75
Maintenance – Lubricants and symbols
Always use high-quality lubricants in the recommended
amounts. Too much grease or oil can cause overheating,
resulting in premature wear.
ENGINE OIL
Ambient temperature 0°C +50°C
Shell Rimula Super 15W40, API CH4 or equivalent.
Ambient temperature -20°C +20°C
Valvoline Premium Blue Extreme 5W-40
HYDRAULIC FLUID
Ambient temperature -15°C +40°C
PN 4812161868 – 20 lits
Dynapac hydraulic 300
Ambient temperature - 33°C
Hydraulic oil-MAK Hydrol HVLP 32
Axle OIL
Ambient temperature -15°C +40°C
Shell Spirax S2 ALS 90 or equivalent
Shell Spirax HD85W90
Drum gear Oil
PN 4812161883 – 5 lits
Gear Oil 300
(Except CA35D)
Drum OIL
Ambient temperature -15°C +40°C
PN 4812161887 – 5 lits
Dynapac Drum oil 1000
GREASE
PN 4812161897 Dynapac Grease or equivalent for
articulated joint.
FUEL See the instruction manual for the engine.
COOLANT
Anti-freeze protection effective down to -37°C.
PN 4812161854 – 20 lit
Dynapac coolant 100
Other fuel and lubricants are required when operating in
areas with extremely high or extremely low ambient
temperature. See the “Special instructions” section or
contact Dynapac.