10-03-2022 4812331840EN 60
Operation – Driving
Operating the roller
The machine should never be controlled from
the ground. The operator should remain seated
at all times.
Set speed selector (26) in high operation position.
Release the parking brake (12).
Check that the steering is working properly by turning the
steering wheel once to the right and once to the left while
the machine is stationary.
Make sure that the area in front of and behind
the machine is clear.
Carefully move the forward/reverse lever (5) forward or
backward. Depending on the desired direction of travel.
The speed increases as the lever is moved away from the
neutral position.
The speed should always be controlled by using
the forward/reverse lever, and never by
changing the engine speed.
Test the emergency stop by pressing the
emergency stop button (2) while the machine is
moving at slow speed. Brace yourself for a
sudden stop. The engine will be switched off
and the brakes activated.
Check while driving if the warning lights are on.
1. Ignition key;
12. Parking brake switch
2. Emergency stop;
26. Speed selector;
5. Forward/reverse lever;
To Next Page
Loading...
Need help?
General
