10 4812331840EN 10-03-2022
Introduction
The machine
Dynapac CA30D is a single drum roller in the 11 tons class
respectively, with a useful drum width of 2130 mm.
Intended use
CA30D is commonly our for compaction during work on road
construction, airports, ports, and industrial areas, etc. It is
available with a smooth drum or padfoot shell assembled on
Drum.
Warning symbol.
WARNING! Identifies a dangerous or risky
procedure that could lead to danger to life or
serious damage, if ignored.
CAUTION! Identifies a risky procedure that could
lead to damage to machine or property, if
Safety information
The Safety Manual supplied with the
machine must be read by all roller operators.
Always follow the safety instructions and do
not remove the manual from the roller.
It is recommended that the operator
carefully reads the safety instructions in this
manual and follows these instructions. Make
sure that the manual is always available.
Read the manual before starting on the
machine.
Make sure there is good ventilation when the
engine is on in closed spaces.
To Next Page
Loading...
Need help?
General
