EasyManuals Logo

Dynapac CA25 User Manual

Dynapac CA25
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Maintenance Planned maintenance
10-03-2022 4812331840EN 87
Maintenance - 50h
Every 50 hours of operation (Weekly)
Park the roller on a level surface.
When checking and making adjustments, the engine
should be switched off and the emergency/parking
brake should be applied, if not otherwise specified.
Ensure that there is good ventilation (air extraction) if
the engine is run indoors. Risk of carbon monoxide
poisoning.
Air cleaner
Checking - the main air filter
Change the air cleaner main filter when
the warning lamp on the control panel
comes on when the engine is running at
maximum speed.
Release the clips (1), pull off the cover (2), and
pull out the main filter (3).
Do not remove the backup filter (4).
Clean the air cleaner if necessary, see
section Air cleaner - Cleaning.
When replacing the main filter (3), insert a
new filter and refit the air cleaner in the
reverse order.
Check the condition of the dust valve (6);
replace if necessary.
When refitting the cover, make sure that the dust
valve is positioned downwards
Back up filter change
Change the back up filter with new filter after every third
replacement of the main filter
To change the back up filter (1), Pull the old filter out of its
holder, insert a new filter and reassemble the air cleaner in the
reverse order.
Clean the air cleaner if necessary, see section air cleaner
Cleaning.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac CA25 and is the answer not in the manual?

Dynapac CA25 Specifications

General IconGeneral
BrandDynapac
ModelCA25
CategoryConstruction Equipment
LanguageEnglish

Related product manuals