10-03-2022 4812331840EN 74
Preventive maintenance
Complete maintenance is necessary for the machine to
function satisfactorily and at the lowest possible cost.
The Maintenance section includes periodic maintenance
that must be carried out on the machine.
The recommended maintenance intervals assume that the
machine is used in a normal environment and working
conditions.
Acceptance and delivery inspection
The machine is tested and adjusted before it leaves the
factory.
On arrival, before delivery to the customer, a delivery
inspection must be conducted as per the check list in the
warranty document.
Any transport damage must be immediately reported to the
transport company.
Warranty
The warranty is only valid if the stipulated delivery
inspections and the service inspections have been
completed as per the warranty document, and when the
machine has been registered at the start of the warranty.
The warranty is not valid if damage has been caused by
inadequate service, incorrect use of the machine, use of
lubricants and hydraulic fluids other than those specified in
the manual, or if any other adjustments have been made
without the requisite authorisation.
To Next Page
Loading...
Need help?
General
