Maintenance – Planned maintenance
10-03-2022 4812331840EN 79
Service and maintenance point
Check the Dobbs meter on the machine to know
what type of maintenance is needed.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of
the sections referred to !
Before starting up for the first time on that day
Check the scraper setting
Check for free circulation of cooling air
Refer to the engine manual
Check the engine oil level
Refer to the engine manual
Check the hydraulic reservoir level
Grease the steering cylinder bearings
Every 50 hours of operation (Weekly)
Refer to the contents to find the page
number of the sections referred to!
Check that hoses and couplings are not leaking
4 Inspect/clean the filter element in the air cleaner Replace as required
16 Lubricate the articulation
Check that the guiding cylinders are tight
19 Check the wheel-nuts are tightened
20 Check the tire pressure
Check the air conditioning
After the FIRST 50 hours of operation
Refer to the contents to find the page
number of the sections referred to !
Pos. in fig
Action Comment
8 Change the hydraulic fluid filter
21 Change oil in rear axle differential
22 Change oil in the rear axle planetary
To Next Page
Loading...
