EasyManua.ls Logo

Dynapac CA300 User Manual

Dynapac CA300
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DYNAPAC
CA300
Box 504, SE-371 23 Karlskrona, Sweden
Phone: +46 455 30 60 00, Fax: +46 455 30 60 30
www.dynapac.com
O300EN1
OPERATION

Other manuals for Dynapac CA300

Question and Answer IconNeed help?

Do you have a question about the Dynapac CA300 and is the answer not in the manual?

Dynapac CA300 Specifications

General IconGeneral
BrandDynapac
ModelCA300
CategoryConstruction Equipment
LanguageEnglish

Summary

Safety When Driving

Driving Near an Edge

Maintain two-thirds drum width on solid ground when near edges.

Driving on Slopes

Drive up/down slopes; avoid driving across. ROPS recommended.

Instruments and Controls Functional Description

Switches and Controls

Covers horn, starter, beacon, lights, brakes, and protection.

Warning Lamps Overview

Details on lamps for charging, brakes, oil pressure, filters, air, and temperature.

Before Starting Procedures

Pre-Start System Checks

Starting the Engine

Engine Start and Warm-up Procedure

Steps for setting controls, starting, and warming up the engine.

Driving the Roller

Roller Operation and Controls

Operate revs control, check steering, brakes, and use forward/reverse lever.

Vibration and Driving Modes

Braking and Switching Off

Using the Reserve Brake for Stopping

Emergency braking procedure and normal operation with reserve brake.

Normal Braking and Engine Shutdown

Normal braking, disengaging vibration, and stopping the roller.

Parking the Roller

Lifting Instructions

Towing Procedures

Towing and Retrieval

Operating Instructions Summary

Core Operational Steps

Steps for starting, driving, braking, and using vibration.

Emergency and Special Procedures

Covers emergency actions, parking, lifting, towing, transport, and retrieval.

Related product manuals