Dynapac CA300 - Parking the Roller; Chocking the Drum for Parking; Battery Disconnector for Parking

21CA300 O300EN1
PARKING
Chocking the drum
Battery disconnector
Never leave the roller with the engine
running unless the reserve/parking brake
knob is pressed in.
Ensure that the roller is parked in a safe
place for traffic. Chock the drums if the
roller is parked on sloping ground.
Remember the risk of freezing during the
winter. Fill the cooling system of the engine
with anti-freeze mixture. See also
maintenance instructions.
Fig. 21 Arrangement
1. Chock
Fig. 22 Battery compartmen
1. Battery disconnector
1
Switch the battery disconnector (1) into disconnected
mode and remove the key before leaving the roller.
This will prevent discharging of the battery and will also
make it difficult for any unauthorized person to start and
drive the machine. Lock the engine compartment too.
1