7CA300 O300EN1
MACHINE AND ENGINE PLATES
Machine plate
PIN on frame
Fig. 3 Operator’s platform
1. Machine plate
Fig. 4 Front frame
1. PIN
1
The machine type plate (1) is affixed on the front left
edge of the tractor frame. The plate shows the
manufacturer's name and address, type of machine
and PIN "Part Identification Number" (serial number).
Please state the PIN (serial number) of the roller when
ordering spare parts.
The PIN (1) of the machine is punched on the front right
edge of the forward frame beam.
1
To Next Page
Loading...
