Dynapac CA25 - Operation Procedures; Start-up Procedures and Pre-Checks

Operation – Start-up
10-03-2022 4812331840EN 56
Operation – Start-up
Before starting
Master switch – Activation
Always perform daily maintenance. See the maintenance
instructions.
The battery master switch is located in the engine compartment.
Open the engine cover and set the key (20) to the ON position.
The whole circuit of the machine gets electric power.
The engine hood must be unlocked when required,
so that the battery can be quickly disconnected.
Operator seat – Adjustment
Adjust the operator's seat in a comfortable position within easy
reach of the controls.
The seat can be adjusted lengthways (21).
Always make sure that the seat is secure before
beginning operation.
Fig. Operator’s seat
21. Length adjustment
21
Fig. Engine compartment
20. Master switch
20