Maintenance – Planned maintenance
10-03-2022 4812331840EN 86
Emergency stop
Drive the machine slowly forward. Hold the steering wheel firmly
and brace yourself for a sudden stop.
Press the emergency stop (1). The machine will stop abruptly
and the engine will be switched off.
After testing the brakes, set the forward/reverse lever in neutral.
Pull out the emergency stop (1).
Turn on the engine.
The machine is ready for operation.
Articulated/Steering joint – Lubrication
Presence of people near the steering
articulation when the engine is running is not
permitted. Danger of being crushed when
steering is operated. Apply the
emergency/parking brake before lubricating.
Clean the dirt and grease from the lubrication points.
Use the lubrication grease according to lubricant specifications.
Use specific grease on the articulated joint.
Apply the lubrication grease (5 strokes) in each
lubrication point
Make sure that grease penetrates into the bearings.
If grease does not penetrate the bearings, it may be
necessary to relieve the articulation joint with a hydraulic
jack while repeating the greasing process.
1. Emergency Stop
Fig. Steering cylinder lubrication
1. Points of cylinder lubrication
Fig. Steering cylinder lubrication
1. Points of cylinder lubrication
(4 points)
To Next Page
Loading...
Need help?
General
