EasyManuals Logo

Dynapac CA25 User Manual

Dynapac CA25
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
Maintenance Planned maintenance
10-03-2022 4812331840EN 88
Air cleaner Cleaning
Wipe the inside of the cover and filter housing.
Wipe also both surfaces of the outlet pipe.
Check that the hose clamps between the filter housing
and the suction hose are tight and that the hoses are
intact. Check the whole hose system up to the engine.
Articulated / Steering JointLubrication
Use specific grease on the articulated joint.
Apply the lubrication grease (5 strokes) in each lubrication point
Make sure that grease penetrates into the bearings.
If grease does not penetrate the bearings, it may be necessary
to relieve the articulation joint with a hydraulic jack while
repeating the greasing process.
1
Fig. Steering cylinder lubrication
1. Points of Articulated joint
lubrication (4 points)
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac CA25 and is the answer not in the manual?

Dynapac CA25 Specifications

General IconGeneral
BrandDynapac
ModelCA25
CategoryConstruction Equipment
LanguageEnglish

Related product manuals