10-03-2022 4812331840EN 57
Before starting
Make sure that the emergency stop (2) is pulled
out.
When the roller is in neutral or there is no load
on the operator's seat, the automatic brake
function is engaged.
Pull out the emergency stop (2).
Turn key to ignition 3rd position.
Check that the warning lamps one the Display (13) are on.
Operator position
If a ROPS (23) (Roll Over Protective Structure) or a cab is
mounted on the drum, always wear the seat belt (22)
provided and wear a protective helmet.
Replace the seatbelt (22) if it is worn out or has
been subjected to high levels of force.
Check that rubber elements (24) on the platform are
in good condition. Worn elements will impair
comfort.
Ensure that the anti-slip protection (25) on the
platform is in good condition. Replace if it does
not provide good anti-slip friction.
If the machine is fitted with a cab, make sure that
the door is closed.
2. Emergency stop;
13. Display;
Fig. Operator’s position:
22. Safety belt;
23. ROPS;
24. Rubber element;
25. Anti-slip protection.
To Next Page
Loading...
Need help?
General
