Maintenance – Planned maintenance
10-03-2022 4812331840EN 105
Controls – Lubrication
Lubricate the forward/reverse throttle mechanism.
Remove the external cover at the bottom of the seat by
loosening the screws (2). Lubricate the drive elements.
Automatic Climate Control
Regular inspection and maintenance are necessary to ensure
satisfactory long term operation.
Clean all Dust from condenser element (1) using compressed
air. Blow from underneath.
The air jet can damage the element flanges if it is too powerful.
Wear protective goggles when working with
compressed air.
Diesel engine – Oil and filter change
Take great care when draining fluid and oil at high
temperatures. Wear protective gloves and goggles.
It is easier to handle the oil drain plug (1) from under the
engine. Drain the oil when the engine is warm. Place a
receptacle that holds at least 15 litres (4 gal) under the drain
plug.
Change the oil filter. Please read the instruction manual for the
engine.
Dispose of the drained oil and filter separately in the
right manner.
1. Condenser element.
Fig. Forward/reverse control
2. Screws
Fig. Left side of engine:
1. Drain plug;
To Next Page
Loading...
Need help?
General
