Technical specifications – Noise/Vibrations/Electrical
10-03-2022 4812331840EN 19
Technical specifications
Noise/Vibrations
Vibrations - Operator station
(ISO 2631)
The vibration levels are measured in accordance with the operational cycle described
in EU Directive 2000/14/EC on machines equipped for the EU market, with vibration
switched on, on soft polymer material and with the operator's seat in the transport
Measured whole-body vibrations are below the action value of 0.5 m/s
2
, as specified in
Directive 2002/44/EC. (Limit is 1.15 m/s
2
)
Measured hand/arm vibrations were also below the action level of 2.5m/s
2
specified in the
same directive. (Limit is 5 m/s
2
Noise level
The noise level is measured in accordance with the operational cycle described in EU
directive 2000/14/EC on machines equipped for the EU market, on soft polymer material
with vibration switched on and the operator's seat in the transport position.
Guaranteed sound power level, L
wA
107 dB (A)
Sound pressure level at the operator's ear (platform),
LpA
90 ±3 dB (A)
Sound pressure level at the operator's place (cab),
LpA
85 ±3 dB (A)
During operation the above values may differ because of the actual operational
conditions.
To Next Page
Loading...
Need help?
General
