Maintenance – Planned maintenance
10-03-2022 4812331840EN 89
Tires – Air pressure – Wheel nuts – Tightening
Check the tire pressures using a pressure gauge.
When the tire is filled with fluid, the valve (1) should be
positioned at “12 o’clock”, once the specified pressure is
reached.
Recommended pressure: See Technical Specifications.
Check the tire pressure.
When changing the tires it is important that both of them have
the same rolling radius. This is necessary to ensure proper
functioning of the anti-slip in the rear axle.
Check the tightening torque on the wheel nuts (2) with
630 Nm (64 kgf.m).
Check both wheels and all the nuts (this only applies to
a new machine or newly fitted wheels).
Check the safety manual that accompanies the machine
before filling with air.
Air conditioning (optional) – Cleaning/Filter change
The filter is in the front of the cab.
Remove the three screws and the protective plastic.
Perform the cleaning or replace with new filters
It may be necessary to replace at shorter intervals if the
machine is operated in an environment with a lot of dust.
1. Air valve
2. Wheel nuts
1. Filters (2x)
2. Screws (3x)
To Next Page
Loading...
Need help?
General
