Dynapac CA 262 Series - Every 50 Hours of Operation (Weekly)

18 CA 262/362/512 M262EN2
Always lower the blade to the ground be-
fore leaving or parking the roller.
Make sure that nobody is in the way when
operating the blade.
Lower the blade.
Wipe the nipples clean from grease and dirt, three on
each side of the machine.
Grease each nipple (1) with four strokes of the grease
gun. Ensure that grease penetrates the bearings.
Fig. 21 Strike-off blade
1. Lubricant nipples
1
Strike-off blade – Lubrication
(Optional CA262PD)
EVERY 50 HOURS OF OPERATION (Weekly)