Dynapac CA 362 Series User Manual

14 CA 262/362/512 M262EN2
EVERY 10 HOURS OF OPERATION (Daily)
Brake function – Check
Fig. 11 Control panel
1. Reserve/parking brake knob
2. Forward/reverse lever
Check operation of the brakes as follows:
Drive the roller slowly forward.
Push the reserve/parking brake knob (1); the warning
lamp on the instrument panel should light and the roller
should stop.
After testing the brakes, set the forward/reverse lever
(2) in neutral.
Pull up the reserve/parking brake knob.
The roller is now ready for operation.
12

Dynapac CA 362 Series Specifications

General

Brand	Dynapac
Model	CA 362 Series
Category	Construction Equipment
Language	English