Dynapac CC122C - Shutting Down the Machine; Engine and Electrical System Shutdown

20
CC 102/C/122/C/132/142/C O102EN3
Switching off
19
65
Fig. 27 Instrument column
2. Ignition switch
5. Vibration switch
6. Reserve/parking brake knob
19. Rev control
2
BRAKING
Check instruments and warning lamps to see if any
faults are indicated, switch off all lights and other
electrical functions.
Turn the starter switch (2) to mode O. Lower the instru-
ment cover (on rollers without cab) and lock it.