Dynascan 10M66 - Frequency Adjustment; Keypad Functions; Memory Channel Operations; Mode, Band, and Display Switching

English - 13 -
- Frequency control:
1. In frequency mode, press [PUSH] knob, then you can adjust frequency for present
channel.
2. When the frequency is flashing, turn [CH] knob clockwise to increase frequency and
anti-clockwise to reduce frequency.
3. When the frequency is flashing, press [PUSH] knob again to adjust frequency step
size.
8
.
-
KEYPAD FUNCTION
:
- [MEM]:
Using memory channel:
1. Short press [MEM] key to enter memory channel, turn [CH] knob to choose memory
channel (M1-M6). Total 6 memory channels.
2. Short press [MEM] key again to exit memory channel mode.
Store / delete memory channel:
1. Store memory channel:
When the transceiver is not in memory channel mode, choose the channel to be
stored, and hold [MEM] key to enter storage mode, the channel number flashes.
Turn [CH] knob to choose the location to be stored (M1-M6), then press and hold
[MEM] key until the flashing channel number disappear, the storage is done.
2. Delete memory channel:
In channel mode, press and hold [MEM] key for over 2 seconds, the memory
channel number flashes; turn the [CH] knob to choose the memory to be deleted.
Then press and hold [MEM] key until the flashing channel number disappear, the
delete is done.
- [MODE]:
Short press [MODE] key to choose mode FM-AM-USB-LSB-PA.
- [BAND]:
Short press [BAND] key to choose band A-B-C-D-E-F-G-H-I.
- [FRQ]:
Short press [FRQ] key to switch between frequency display and channel display mode.
- [MENU]:
1. Short press [MENU] key, the top left of LCD display “F” icon. Press [PUSH] knob to
enter channel function menu list.
2. Press and hold [MENU] key for 2 seconds to enter function menu.