Need help?Do you have a question about the Dynascan 10M66 and is the answer not in the manual?
Installation of the transceiver in a vehicle, considering accessibility and safety.
Instructions for connecting the DC power cable to the vehicle's battery for mobile installation.
Guidance for setting up the transceiver as a fixed station using a separate power supply.
Procedure for identifying and replacing blown fuses in the transceiver.
Steps and considerations for installing an efficient, well-tuned antenna for optimal performance.
Overview of the transceiver's main features including LCD, modulation, tuning steps, and special functions.
Identification and function of controls and indicators on the transceiver's front panel.
Description of connectors and ports located on the rear panel of the transceiver.
Details about the microphone, its controls, and connector.
Explanation of the icons and information displayed on the transceiver's LCD screen.
Instructions for powering on/off, adjusting volume, RF power, and RF gain.
Adjusting squelch, using the clarifier, and selecting channels.
Detailed steps for adjusting frequency and frequency step size.
How to use, store, and delete memory channels on the transceiver.
Switching between modes, bands, and frequency/channel display.
Using scan, dual-watch, emergency channel, and keypad lock functions.
Configuring Hi-cut, Noise Blanker/ANL, Echo, and +10 kHz functions.
Adjusting ROGER beep and busy channel lockout settings.
Configuring DTMF encode functions and resetting settings to default.
Adjusting beep, LCD display mode, and microphone gain.
Settings for monitor gain, Time-Out Timer (TOT), and SWR protection.
Configuring voltage protection, scan type, and clarifier settings.
Adjusting backlight color, frequency range, and ASQ level.
Configuring DTMF encode parameters and performing full resets.
General specifications including frequency range, bands, channels, and physical dimensions.
Technical details of the transmitter, including RF power, modulation, and distortion.
Technical specifications for the receiver, including sensitivity and selectivity.
General| Brand | Dynascan |
|---|---|
| Model | 10M66 |
| Category | Transceiver |
| Language | English |
To Next Page
