DS471LT4 User Manual 23
Display Mode Landscape
Change the orientation of the Menu. The
Menu can be displayed in either LANDSCAPE
or PORTRAIT mode.
Screen Saver Off
Turn on / off image burn-in protection.
Sets image burn-in protection interval.
Remote Control RS232
Choose to use the remote control function
RS232 or Network.
IR Control On
Enables / disables the ability to use the remote
to control the Menu.
Note: When disabled, the remote control
function can be enabled again from the control
panel on the display or through the DynaScan
“Display Manager” application.
Power Off Mode Standby
When in Power Off Mode, RS-232 controls do
not function. Only [Main Power Switch] on the
display or [Power Button] on the remote
controller can wake up the display.
Advance
Reset to Default Setting Off
Restores all settings to default.
Note: Does not modify CURRENT TIME,
POWER ON TIME, POWER OFF TIME.
Resolution 1920x1080 Input resolution.
Model DS471LT4 The display’s model.
Information
Serial Number The display’s serial number.
Hardware The H/W version.
Engineer Mode
Firmware The F/W version.
Some functions may not be available for all models.
*Adjusted value: Each R/G/B value for this product has been individually adjusted in during production to a
preset color temperature of 6500K.
To Next Page
Loading...
