EasyManua.ls Logo

Dynascan L88+ - Troubleshooting

Dynascan L88+
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 21 -
10
.
-
TROUBLESHOOTING
:
If you have problems with the operation of your radio, follow the instructions in the
following table.
Problem
Cause/Possible solution
The radio does not turn
on when operating the
[ON/OFF/Vol] control.
- The battery pack is discharged. Charge the battery pack.
- The battery pack life is finished. Replace the battery pack for
a new one of the same characteristics as that supplied with
this radio.
- The battery pack was not installed correctly. Remove and
install again.
Battery power dies
shortly after charging.
- The battery life is finished. Replace the battery pack for a
new one of the same characteristics as that supplied with this
radio.
Cannot communicate
with other members in
your group.
- Make sure that you use the same channel and the same
tone or code as the other members of your user group.
- It is very far from the other members of its user group. Make
sure you are within the coverage range of other users.
Other communications
are listened on the
channel.
- Change the CTCSS tone or DCS code of all radio´s in your
users group.
Once carried out these previous checking’s, if it continues having problems with
the radio, consult with the Authorized Technical Service.

Related product manuals