AIR Menu structure and parameters
Dynaudio Professional AIR reference manual – 2014-09-28 20
In this chapter, you will learn how to navigate the menu
structure of your AIR monitors, access and change pa-
rameters such as system setup, bass management and
monitor tasks.
Once you know how to navigate the AIR Menu struc-
ture, you can congure and calibrate your system. All
standard setups are shown and explained in “AIR set-
ups” on page 29.
Home screen
Fig. 7: AIR monitor home screen, showing the sample
rate, the monitor’s task and the volume
The home screen of your AIR Master unit will show the
role/position of the monitor (once it has been set up)
and the set volume for this unit.
A “+” in the upper right corner indicates that this spe-
cic Master Unit has been set up to act as the System
Controller – see “System Controller, Master or Slave”
on page 9.
When the home screen is shown, you can use the ar-
row keys to the right of the display to set the volume.
Tap the buttons to change volume in 0.5 dB steps,
press and hold to change it continuously.
To Next Page
Loading...
