19
FACTORY DEFAULTS
Factory Default settings.
The factory default settings are as follows:
Power Mode: Automatic
Phase: 0°
Level: 0dB
EXT: On
LF Cut-off: 100Hz
To reinstate the factory default settings:
• Switch the subwoofer off completely using the switch on
the back panel (No.2 in fig.2).
• Wait for at least 10 seconds.
• Press and hold the "A" preset button (No. 6 in fig 6).
• While holding down the "A" preset button, switch on
subwoofer back on: The power Status LED will start to
flash green.
• Release the "A" preset button. The subwoofer is now
reset to the factory default settings.
All previously stored presets will be deleted also
when resetting to factory defaults
To Next Page
Loading...
