10
confidence_Dynaudio CONNECTING TO THE ELECTRONICS
3. MULTI CHANNEL SET UP
The Dynaudio Confidence models are designed to offer the most
advanced performance in both stereo and multi-channel applications,
effectively enabling the maximum performance from either of these
formats. When connecting a loudspeaker to a multi channel set up, in
general the same guidelines as previously mentioned in the
text above will apply. The Confidence models are magnetically
shielded and therefore can be placed near TV sets or other sensitive
electronics without any affects or influence.
Please note that when setting up a home theatre system, the
loudspeakers should create a realistic soundstage with similar sound
characteristics on each channel. It is therefore important that any
speaker used in conjunction with the Confidence models should
match their high quality level. This is especially important with
regards to the center channel loudspeaker, as this is critical aspect of
any multi-channel soundstage. Because there are many different set
up options - from 5.1 to 10.2 channel applications - and the fact that
loudspeaker positioning will also depend upon the room’s shape,
please consult your trained Dynaudio dealer for special applications
and for placement options and possibilities.
4. CHOICE OF LOUDSPEAKER CABLE
The impact a loudspeaker cable can have on sound quality may have
a dramatic effect, though in general quality cable products will yield a
quality result.
Dynaudio loudspeakers are designed to be very neutral and as such
are not extremely suited to any particular type of cable. The choice of
cable is as much a factor of matching the cable to the entire audio
system. Please consult your Dynaudio dealer for information about
compatible loudspeaker cables that will suit both your electronics and
the Confidence loudspeakers.
CONNECTING
To Next Page
Loading...
Need help?
General
