5. Attenuation: for use with two or four subwoofers
6. Digital channel: selects the left, right, or left + right channels of the AES digital input signal
7. Analogue input sensitivity: sets the maximum input voltage
8. SPL level: sets the SPL for -6 dBFS (-6 dB from selected maximum input voltage)
9. AC power Input (100-240 V)
10. Analogue in: Balanced analogue input (XLR)
11. Digital In: AES digital input (XLR)
12. Digital Out: AES digital output – pass through for second monitor (XLR)
13. Word Clock: Word Clock input (75 Ω BNC)
14. Service: USB Type B for firmware update or service
Core 7, 47, 59 monitors and Core Sub 9
To Next Page
Loading...
