Need help?Do you have a question about the Dyness A48100 and is the answer not in the manual?
General| Nominal Voltage | 48V |
|---|---|
| Nominal Capacity | 100Ah |
| Energy | 4.8kWh |
| Weight | 45 kg |
| Max Continuous Charge Current | 50A |
| Max Continuous Discharge Current | 100A |
| Protection Level | IP20 |
| Battery Type | LiFePO4 |
| Cycle Life | 6000 cycles @ 25°C |
| Communication | CAN, RS485 |
| Charge Voltage | 54.0V |
| Storage Temperature Range | -20°C to 45°C |
Provides a brief overview of the A48100 battery system unit and its applications.
Details the key features and advantages of the A48100 energy storage product.
Explains warning symbols and product identification elements.
Details the physical dimensions and weight of the A48100 device.
Lists key performance metrics including voltage, capacity, and current ratings.
Explains the functions and layout of the device's front interface.
Details DIP switch functions for master communication protocol and baud rate selection.
Explains DIP switch settings for master configuration with various inverter models.
Details the pin definitions for CAN/485 and COM communication interfaces.
Describes the meaning of various LED indicators on the device.
Details BMS functions including voltage, current, and temperature protection.
Outlines safety requirements and environmental conditions for installation.
Specifies environmental conditions like temperature, humidity, and location for optimal operation.
Lists the essential tools and meters required for the installation process.
Covers electrical interface checks and security measures before installation.
Details the process of inspecting the equipment upon arrival and after unpacking.
Lists all items included in the product package.
Provides a step-by-step guide for installing the battery system and connecting components.
Step-by-step guide for installing brackets and mounting battery modules onto them.
Instructions for mounting the battery system on a wall using expansion bolts.
Details electrical connections, including ground, parallel, and communication cables.
Covers cable checks, continuity, short circuit testing, and polarity confirmation.
Steps for powering on, waking up the battery, and checking status indicators.
Details connecting battery system cables and communication to the inverter.
Configuration settings for the battery parameters on the inverter.
Instructions for registering the product on the Dyness website for warranty.
Steps to start the battery system, including DIP switch and button operations.
Explains alarm indications on the front panel and how to query specific alarm categories.
Provides solutions for common faults and troubleshooting scenarios.
To Next Page
