Need help?Do you have a question about the Dynisco ATC770-0-2-3 and is the answer not in the manual?
General| Alarm Output | Relay |
|---|---|
| Communication | RS-485 Modbus RTU |
| Display | Dual 4-digit LED |
| Control Modes | PID, On/Off |
| Input Type | Thermocouple, RTD |
| Control Output | Relay, SSR |
| Power Supply | 100-240 VAC |
| Operating Temperature | 0 to 50°C |
Step-by-step guide for installing the instrument into a panel.
Details on different ATC770 model configurations and options.
Physical dimensions, operating temperature, and humidity limits.
Details on main input, digital input, control & retransmission outputs.
Details on PID, SMART, TUNE, and Adaptive tuning algorithms.
Mapping of external connections to internal terminals for wiring.
Overview of parameter groups, keyboard operation, and initial setup.
Configuring the type, scale, and calibration for the primary input.
Setting access levels and security codes for parameter protection.
Steps to calibrate the instrument to the connected input device.
Procedures for engaging SMART tuning and automatic control modes.
Setting alarm types, thresholds, hysteresis, and failsafe modes.
Configuring output range, direct/reverse action, and limits.
List of error codes, their causes, and corrective actions.
General procedures and dip switch settings for calibration.
Guidelines for cleaning and maintaining the instrument's components.
Contact details for repair and product warranty information.
To Next Page
