Dyson Airblade - Removing the Fascia Cover

Dyson Airblade
TM
hand dryer
Installation Procedures
Fig 5
Fig 6
Removing the
Fascia Cover
WARNING: Use caution
when removing casing.
The casing may have sharp
edges/corners which may
cut or cause harm.
Place the Airblade
TM
hand dryer
face up on a dry and clean work
surface to protect the product and
the property from damage.
Fig 3
Fig 4
7
Remove the (5) tamper proof
screws from the unit in the
sequence illustrated in
Figs 3-5
with the provided tamper proof
service tool, then remove the
fascia cover as illustrated in
Fig 6
.
ENG